Power generation filtration

High surface area and exceptional flow suit fine polishing on large systems. Nylon end caps on a stainless steel build lift the maximum operating limit from 80 °C to 100 °C.

A large-diameter cartridge for high-volume liquid filtration. It has no built-in core, fitting onto your housing’s instead to reduce waste. No binders or resins go into the fibre, which keeps the filtrate free of shed material.

Takes the core-free Contour and works KilBac antimicrobial and anti-algal additives into the fibre, so it filters at high flow while holding off biofouling. Losing the core, cage, and end caps also cuts the plastic waste headed to landfill.

Large-diameter cartridges up to 60″ filter high volumes with quick change-outs. With a 153 mm diameter, they fit standard high-flow housings seamlessly.

Centre closure split shell housings with an inverted dished end, in 3, 5, 10, or 15 stacks. Removing the lightweight dome gives full access, so plug-in cartridges lift straight out.

Screw clamp housings for 3, 5, or 10 cartridges, rated to 16 bar g in liquids. They also take gases and are suitable for full vacuum operation.