Filter Housings

Our expertise and engineering design techniques have made us one of the leading manufacturers in Europe, offering the widest selection of cartridge and bag filter housings available today. In addition to manufacturing our standard products we utilise the latest 3D modelling techniques to supply fully documented and certified customised designs. Our design team is fully conversant in the increasing technical demands of pressure vessel design codes including ASME VIII, PD5500 and EN13445. All our products are ATEX and Pressure Equipment Directive (PED) 2014/68/EU compliant and we are also accredited for Self Certifying to Module H of the PED.

Plastic Housings

We offer and extensive range of plastic housings. The 20 Series is a range of low cost plastic housings. The polypropylene 26 Series is designed to accommodate a single or double length 7” bag. The 28 Series can accommodate a single 10” or 20” filter of either standard diameter or the large diameter B-Blue version. The standard 27 Series is suitable for 3, 5, 10 or 15 stacks of 70 mm diameter filters and the 27 Series GRP housing can be fitted with a large bore high flow cartridge.

Single Cartridge Housings

We offer a wide range of housings suitable for smaller process flows where a single filter cartridge is required. The high quality 50 Series housing range is supplied for smaller process flows where a single filter cartridge is required. The 51 Series is suitable for general applications and the 52 Series and 53 Series are designed for higher pressures. The 54 Series ClearView housing contains a borosilicate ‘viewing’ section to assist in process monitoring. Other products in this range include the easy access 55 Series housing, the 56 Series which utilises a high security closure and the new 59 Series for mastic solutions.

Multi Cartridge Housings

The 60 Series is a range of light weight multi-cartridge housings suitable for general liquid and gas process applications. They are offered with a range of closure types and inlet and outlet connections. The range includes the free standing 61 Series housings and the dished end 62 Series. The 63 Series and 64 Series housings have a centre closure to provide easier access for filter change outs. The 65 Series housing is designed for higher pressures and the 66 Series is  specifically for high flow, large diameter filters.

Sanitary Housings

The hygienic 70 Series range is manufactured to have a high quality surface finish and is suitable for the most critical applications found in the Pharmaceutical, Fine Chemicals and Beverage industries. The 71 Series is designed for vessel venting and the single stack 72 Series, 76 Series, 76 Series ClearView and multi-stack 73 Series designed for liquid filtration. Where filtration of compressed air or gases is required we offer the 74 Series housing with a plenum.

Bag Filter Housings

The 80 Series is a comprehensive range of bag filter housings and includes a wide selection of styles to suit almost all liquid applications. The 81 Series is designed for mini bags, the 82 Series and 84 Series are ranges of free standing single bag housings and the 83 Series, 85 Series and 86 Series are dished end housings suitable for applications where maximum drainage is required . We also offer 87 Series and 88 Series a range of multi-bag housings for higher flow applications.

Corrosion Resistant Housings

Amazon Filters is a leading supplier of filter housings to a wide range of industries including many where effective filtration of chemical products is critical to their operations.
In order to provide enhanced support to companies who have a requirement to filter highly corrosive fluids Amazon Filters is introducing two new ranges of filter housings – Tantaline housings and 18 Series PTFE housings. These exhibit exceptional resistance to chemical damage.
bespoke filters

Special and Custom Designs

Amazon Filters bespoke design and manufacturing capabilities enable us to provide systems with improved ergonomics, efficiency and Health & Safety benefits. Filter housings can be designed to International pressure vessel design codes (ASME VIII, ASME X, EN13445 and PD5500) and are ATEX and Pressure Equipment Directive (PED) 2014/68/EU compliant. We are also accredited for Self Certifying to Module H of the PED.

Technical Data

  • ATEX - Legislation and guidance for controlling explosive atmospheres and how it relates to filters and housings
  • PED – Information on compliance of Amazon’s filter housing range to Pressure Equipment Directive 2014/68/EU
  • Filter cartridge end fittings – the wide range of end caps available from Amazon Filters.